Exam Code : 7003
Exam Name : Avaya Communication Server 1000 for Avaya Aura Implementation
Vendor Name :
"Avaya"
7003 Dumps
7003 Braindumps
7003 Real Questions
7003 Practice Test
7003 Actual Questions
killexams.com
Avaya Communication Server 1000 for Avaya Aura Implementation
https://killexams.com/pass4sure/exam-detail/7003
D. Re-configure the network Routing Service to reflect the Call Server ELAN IP address.
A customer has a Communication Server (CS) 1000 Rls. 7x Co-Resident system with a Media Gateway Controller and Media Cards and has completed the configuration of all elements and they are all active and known to the Call Server. The customer wants to add all the elements to the Security Domain. Which Overlay 117 commands used to add the element to the Security Domain?
JoinSecDomain
Join ucmSecurity element
Register ucmsecurity device
Register ucmSecurity system
Click the Exhibit button.
A technician is asked to review the existing route information for the customer. According to the printout shown in the exhibit, type of route is this?
A direct inward dial route
An analog route
A media services route
An outgoing only route
A customer is planning to install and configure a Commercial Off the Shelf (COTS) server IBM X3550 as a Signaling Server for their Communication Server (CS) 1000 Rls.. 7x network. Which two statements describe the software installation process? (Choose two)
Before Linux Base software, the COTS server must be configured as a member server.
Application software is loaded onto the COTS server using Deployment Manager.
Linux Base software and application software are pre-loaded onto the COTS server at the factory
Linux Base software is installed using command line interface and a bootable DVD containing software and operating system
A customer with an existing Option 11C Rls. 5.5 chassis system plans to upgrade to a Communication Server (CS) 1000E Rls. 7x Standard Availability with a single IP Media Gateway (MG) 1000E chassis. To complete the upgrade, which component in the Option 11C must be replaced?
SSC Card
Call Processor
Media Gateway
Digital Line Card
A field calls about a problem enabling the DSPs on a new Communication Server (CS) 1000E SA Co- resident on release 7x. The DSPs on the MG 1 are all enabled but enabling the DSPs on MG2 and MG3 fail, and asked that the configuration be reviewed.
MG1: CPMG 128
MG2: MGC 128 DSP DB in position 2 MG3: MGC 128 DSP DB in position 2
After reviewing the configuration, an error in the DSP 128 VGW (DSP) configuration is identified? Which configuration option accurately reflects the proper configuration for the voice Gateway (DSP) channel?
Numbering of VGW channels: 128
Trunk data block VGW Terminal number: 004 0 02 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00
Numbering of VGW channels: 128
Trunk data block VGW Terminal number: 004 0 01 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00
Numbering of VGW channels: 128
Trunk data block VGW Terminal number: 004 0 00 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00
Numbering of VGW channels: 128
Trunk data block VGW Terminal number: 004 0 11 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00
A Communication Server (CS) 1000E Rls. 7x customer has decided to implement UNIStim security with DTLS. Which statement regarding UNIStim security with DTLS is true?
It is provided by the Secure Multimedia Controller 2450.
It encrypts UNIStim signaling between the line Terminal Proxy Server and IP telephones.
It provides media security between the IP telephones.
It provides security between the Ip telephone and Call Server.
A customer is upgrading an existing option 11C Rls. 5.5 chassis system with an SSC card Communication Server (CS) 1000E Rls. 7x Standard Availability with a single IP media Gateway 1000E chassis. As a part of this upgrade a CPMG Co-Resident call Server, Signaling Server Card and Gateway Controller has been included as part of the upgrade. What happens to the Terminal Number (TN) format during this upgrade?
The TN format is automatically converted to the large system format of Loop-Shelf- Card-Unit for all assigned Terminal Numbers.
The TN format is automatically converted to the large system format of Card-Unit for all assigned Terminal Numbers
The TN format is automatically converted to the large system format of Loop-Shelf- Card-Unit for all new programmed Terminal Numbers
The format is automatically converted to the large system format of Loop-Shelf-Card- Unit for IP phones only. All other devices assigned Terminal Numbers must be manually reprogrammed.