Exam Code : API-571
Exam Name : Corrosion and Materials Professional
Vendor Name :
"API"
API-571 Dumps
API-571 Braindumps API-571 Real Questions API-571 Practice Test
API-571 Actual Questions
killexams.com
Corrosion and Materials Professional
https://killexams.com/pass4sure/exam-detail/API-571
Question: 285
With steam blanketing, failure occurs as a result of in the tube from the internal steam pressure at the elevated temperature.
A . Stress risers B . Velocity
C . Hoop stress
D . Tensile strength
Question: 286
Carbon dioxide corrosion results when CO² dissolves in water to form acid. A . Sulfuric
B . Hydrochloric C . Carbonic
D . None of the above
Question: 287
Protection in a boiler from boiler feed water corrosion is accomplished by: A . Injecting chlorines to kill microbiological bugs.
B . Injecting caustic to lower the ph to < 4.0.
C . Lowering solids content in boiler feed water to less than 50 ppm. D . Maintaining a protective corrosion layer of magnetite (Fe3O4).
Question: 288
Susceptibility to hydrogen stress cracking with hardness. A . Increases, increasing
B . Decreases, increasing C . Decreases, Decreasing D . Both A and C
Question: 289
With sour water corrosion, corrosion increases with NH4HS concentration and velocity. A . Increasing, Decreasing
B . Increasing, Increasing C . Decreasing, Decreasing D . Decreasing, Increasing
Question: 290
is the main concern during start-up, shutdown and/or hydro testing for equipment/piping operating at elevated temperatures. This event can also occur in an auto refrigeration event in units processing light hydrocarbons. A . Stress fracture
B . Carburization C . Spheroidization D . Brittle fracture
Question: 291
With creep, increased stress due to loss in thickness from corrosion will time to failure. A . Increase
B . Reduce
C . Not affect
D . None of the above
Question: 292
With hydrofluoric acid corrosion, corrosion rates increase with temperatures and HF concentrations. A . Increasing, decreasing
B . Decreasing, increasing C . Increasing, increasing D . Decreasing, decreasing
Question: 293
To prevent hydrogen embrittlement, use lower strength steels and to temper the microstructure, improve
ductility and reduce residual stresses. A . Alloys
B . Preheat C . PWHT
D . All of the above
Question: 294
The level of creep damage is a function of the material and the coincident level at which the creep deformation occurs.
A . Pressure/Temperature B . Pressure/Stress
C . Temperature/Stress D . None of the above
Question: 295
A form of corrosion that can occur at the junction of dissimilar metals when they are joined together in a suitable electrolyte is .
A . Galvanic corrosion B . Anodic corrosion C . Cathodic corrosion D . All of the above
Question: 296
The primary factors affecting high temperature oxidation are metal temperature and . A . Pressure
B . Alloy composition C . Stress
D . Oxygen
Question: 297
Sulfuric acid promotes general and localized corrosion of carbon steel. Carbon steel heat affected zones may experience severe corrosion. Acid concentration, temperature, alloy content and are critical factors affecting sulfuric acid corrosion.
A . Pressure
B . Stress
C . Velocity D . Ductility
Question: 298
Which of the following materials is affected by high temperature corrosion? A . Carbon steel
B . 300 Series SS C . 400 Series SS
D . All of the above
Question: 299
Many thermal fatigue cracks are filled with: A . chlorides.
B . hydroslime. C . oxides.
D . sulfides.
Question: 300
Ammonium chloride corrosion is the general or localized corrosion, often pitting, normally occurring under ammonium chloride or amine salt deposits. All commonly used materials are susceptible to ammonium chloride corrosion. A small amount of can lead to very aggressive corrosion.
A . Ammonium chloride B . Amine
C . Water D . Salt