Exam Code : CWAP-403
Exam Name : Certified Wireless Analysis Professional (CWAP)
Vendor Name :
"CWNP"
CWAP-403 Dumps CWAP-403 Braindumps
CWAP-403 Real Questions CWAP-403 Practice Test CWAP-403 Actual Questions
killexams.com
Certified Wireless Analysis Professional (CWAP)
https://killexams.com/pass4sure/exam-detail/CWAP-403
What is the function of the PHY Preamble?
To set the modulation method for the MPDU
Allows the receiver to detect and synchronize with the signal
To terminate a conversation between transmitter and receiver
Carries the NDP used in Transmit Beamforming and MU-MIMO
Which one of the following is required for Wi-Fi integration in laptop-based Spectrum Analyzer software?
A supported WLAN adaptor with a customized driver
Any 802.11 wireless adaptor
A dual radio spectrum analyzer card
SNMP read credentials to the WLAN controller or APs
Which one of the following is not a valid acknowledgment frame?
RTS
CTS
Ack
Block Ack
Which common feature of a Spectrum Analyzer would be the best to help you locate a non-802.11 interference source?
Max hold
Location filter
Waterfall plot
Device finder
Prior to a retransmission what happens to the CWmax value?
Reset to 0
Doubles and increases by 1
Increases by 1
Set to the value of the AIFSN
Which one of the best following is an advantage of using display filters instead of capture-time filters?
Display filters allow for focused analysis on just the packets of interest
Once created display filters are reusable for later captures
Display filters only hide the packets from view and the filtered packets can be enabled for view later
Multiple display filters can be applied simultaneously
During a VHT Transmit Beamforming sounding exchange, the beamformee transmits a
Compressed Beamforming frame to the beamformer. What is communicated within this Compressed Beamforming frame?
Steering Matrix
Beamforming Matrix
Feedback Matrix
Beamformee Matrix
You are troubleshooting a client that is experiencing slow WLAN performance. As part of the troubleshooting activity, you start a packet capture on your laptop close to the client device. While analyzing the packets, you suspect that you have not captured all packets transmitted by the client. By analyzing the trace file, how can you confirm if you have missing packets?
Look for gaps in the sequence number in MAC header
Protocol Analyzers show the number of missing packets in their statistics view
Retransmission are an indication of missing packets
The missing packets will be shown as CRC errored packets