Latest DES-5121 Practice Tests with Actual Questions

Get Complete pool of questions with Premium PDF and Test Engine

Exam Code : DES-5121
Exam Name : Specialist - Implementation Engineer, Campus Networking
Vendor Name : "DELL-EMC"






DES-5121 Dumps DES-5121 Braindumps

DES-5121 Real Questions DES-5121 Practice Test DES-5121 Actual Questions


killexams.com


DELL-EMC


DES-5121


Specialist - Implementation Engineer, Campus Networking


https://killexams.com/pass4sure/exam-detail/DES-5121

QUESTION 57 If VoIP traffic uses multiple QoS prioritization schemes, what refers to VoIP traffic?


A. COS 2, DSCP 22, AF B. COS 2, DSCP 46, EF C.

COS 5, DSCP 42, AF

D. COS 5, DSCP 46, EF


Correct

Answer: D


QUESTION 58 In order to alter a packet’s routing direction, which packet layers can policy-based routing use?


  1. Transport, Network, Link Layer, and Physical

  2. Link Layer, Physical, Presentation, and SessionC. Network, Link Layer, Physical, and Session

D. Application, Transport, Network, and Link Layer


Correct

Answer: A


QUESTION 59 A network administrator wants to configure an ACL to deny traffic for a specific source IP and source UDP port.


Which type of ACL should be used?


  1. Layer 2 Standard ACL

  2. Layer 2 Extended ACL

  3. Layer 3 Standard ACL

  4. Layer 3 Extended ACL


Correct

Answer: D


QUESTION 60 How does the weighted Queue Scheduler prioritize packets?


  1. Scheduler prioritizes weighted queues over any strict queues

  2. Weights are calculated based on the number of packets

  3. Weights are used to calculate the number of bytes

  4. Weight is assigned to each port

Correct

Answer: C


/R eference:

Reference: https://infohub.delltechnologies.com/static/media/6582046d-70f0-4ab6-ba72-2c0b9cf26649.pdf page 6


QUESTION 61 Which packet characteristics can policy-based routing be configured to match against?


  1. TTL, TCP Port, and L3 Packet Length

  2. L3 Packet Length, TTL, and 802.1p Priority

  3. TCP Port, L3 Packet Length, and 802.1p Priority

  4. TCP Port, TTL, and 802.1p Priority


Correct

Answer: C


QUESTION 62 Which spanning tree feature will prevent unnecessary timeouts from DHCP servers?


  1. PortFast

  2. Loop Guard

  3. BPDU Flooding

  4. Root Guard


Correct

Answer: A


Reference: https://www.dell.com/community/Networking-General/Advice-on-basic-STP-and-network-design/td-p/4434346


QUESTION 63 Refer

to the Exhibit.


Switch-1(config)# radius server host 10.1.1.111 Switch-1(config-radius)# key "secretkey" Switch-1(config-radius)# exit

Switch-1(config)# aaa authentication login "LOCAL-AUTH" local

Switch-1(config)# aaa authentication login "REMOTE-AUTH" radius local Switch-1(config)# aaa authentication enable "REMOTE-AUTH" radius enable Switch-1(config)# aaa authentication login default tacacs local

Switch-1(config)# aaa authentication enable default tacacs enable Switch-1(config)# line telnet

Switch-1(config-telnet)# login authentication "REMOTE-AUTH" Switch-1(config-telnet)# exit

Switch-1(config)# line ssh

Switch-1(config-ssh)# login authentication default Switch-1(config)# exit

Switch-1(config)# line console

Switch-1(config-line)# login authentication "LOCAL-AUTH" Switch-1(config- line)# exit


Which authentication method will be used if a user tries to log into the switch when accessing through SSH?

  1. RADIUS, then fails over to a local user account

  2. Local user account

  3. TACACS, then fails over to a local user account

  4. None

Correct

Answer: C


QUESTION 64


Based on the exhibit, which configuration on interface Gi1/0/18 will allow the DHCP request to reach the DHCP server for the specified VLAN?


A. Configuration A:

console(config-if-Gi1/0/18)# switchport mode general console(config- if-Gi1/0/18)# switchport general pvid 20 console(config-if-Gi1/0/18)# switchport general allowed vlan add 20 console(config-if-Gi1/0/18)# switchport general allowed vlan remove 1 B. Configuration B:

console(config-if-Gi1/0/18)# switchport access vlan 10 console(config-

if-Gi1/0/18)# service-policy in dhcp_250 console(config-if-Gi1/0/18)# switchport general allowed vlan add 20 console(config-if-Gi1/0/18)# switchport general allowed vlan remove 1 C. Configuration C:

console(config-if-Gi1/0/18)# switchport access vlan 10 console(config-

if-Gi1/0/18)# ip dhcp snooping trust console(config-if-Gi1/0/18)# switchport general allowed vlan add 20 console(config-if-Gi1/0/18)# switchport general allowed vlan remove 1 D. Configuration D:

console(config-if-Gi1/0/18)# channel-group 100 mode active

console(config-if-Gi1/0/18)# switchport access vlan 250 console(config-if-Gi1/0/18)# switchport general allowed vlan add 20 console(config-if-Gi1/0/18)# switchport general allowed vlan remove 1 Correct

Answer: A

QUESTION 65 How many untagged VLANs are allowed on a switchport mode trunk interface?


  1. 0

  2. 1

  3. 128

  4. 4096


Correct

Answer: B