Latest HPE6-A44 Practice Tests with Actual Questions

Get Complete pool of questions with Premium PDF and Test Engine

Exam Code : HPE6-A44
Exam Name : Aruba Certified Mobility Professional (ACMP) V8
Vendor Name : "HP"

Reference: http://community.arubanetworks.com/t5/Wireless-Access/license-requirements-air-monitor-spectrum-monitor/td-p/243832

Question: 141

A company opens a new branch office and a RAP is used to connect to a corporate office Aruba Mobility Controller (MC). The company needs to provide connectivity to the office across the street. There is an AP across the street. However, there is no wired connectivity between the buildings. Which actions can the administrator select to provide the required connectivity? (Choose two.)

1. Provision all Aps at the branch office as Mesh Points.

2. Provision all Aps at the branch offices as Mash Portals.

3. Implement one of the Aps as a Mesh Point.

4. Provision the RAP as a Mesh Portal.

5. Implement two mesh clusters.

Answer: AD

Question: 142

A customer uses an SIP application that is not supported by Aruba United Communications and Collaboration (UCC). Which voice deployment mode should the administrator implement on Aruba Mobility Controllers (MCs) to support this application?

1. Heuristic mode

2. SDN-API mode

3. QoS-mode

4. WMM-only mode

Answer: A

Question: 143

An administrator implements a ClearPass solution to authenticate Aruba wireless users. The Aruba wireless solution is an ArubaOS 8.x Mobility Master (MM) deployment. ClearPass sends an Aruba VSA role name for an authenticated user. However, the administrator notices that the role assigned to the user is different from the one assigned by the ClearPass server.

Which two items should the administrator verify that might be the cause of this problem? (Choose two.)

1. Enablement of user roles on the controller

2. Spelling of the role on the ClearPass server

3. Server-derived role assignment on the ClearPass server

4. Role existence on the Managed Network

5. Order assignment that the controller uses to select a user role

Answer: BD

Question: 144

An administrator has a cluster of Aruba Mobility Controllers (MCs). The administrator wants to manually reboot one of the controllers. Before rebooting, which command should the administrator use to move the APs?

1. apmove

2. lc-cluster move ap

3. active-ap-rebalance

4. active-ap-lb

Answer: B

Question: 145

Which Aruba Unified Communications and Collaboration (UCC) deployment mode should be used when UCC is disabled on the Mobility Controllers

(MCs)?

1. Heuristics mode

2. WMM mode

3. ALG mode

4. SDN-API mode

Answer: B

Question: 146

An administrator supports a cluster of four Aruba Mobility Controllers (MCs) with management addresses of 10.1.100.101, 10.1.100.102, 10.1.100.103, and 10.1.202.181. The administrator accesses an AP associated with this cluster, reboots it and accesses apboot mode. The administrator executes the printenv command. Which AP parameter contains the IP addresses of the cluster members that the AP should use to connect to the cluster?

1. Nodelist

2. Servername

3. Master_ip

4. Cfg_lms

Answer: A

https://www.arubanetworks.com/assets/atmosphere/2018-Airheads/Fundamentals%20Guide%20-%20ArubaOS%208%20Fundamentals.pdfPage 89 QUESTIO

Question: 147

A VIA client tries to initially connect to corporate office controller through an intermediate firewall. However, the VPN connection fails. The administrator examines the firewall rules and determines that rules for UDP 4500 and UDP 500 are configured.

Which additional protocol must be allowed in the firewall rules to resolve this connection failure?

1. TCP 22

2. TCP 443

3. UDP 8200

4. ESP

Answer: D
Question: 148 Refer to the exhibit.

What can be determined from the command output shown in the exhibit?

1. The synchronized data is protected by VRRP.

2. The command was executed on the standby Mobility Master (MM).

3. The synchronization period is at its default value.

4. The other Mobility Master (MM) is the active license server.

Answer: D
Question: 149 Refer to the exhibit.

An administrator supports a RAP at a branch office shown in the exhibit. The company has one Mobility Controller (MC) at the Primary DMZ site and one at the Secondary DMZ site. The RAP is configured to connect to only the MC at the Primary DMZ site. A network outage with the ISP at the

Primary DMX site causes the RAP to reboot. Upon reboot, the RAP cannot build a tunnel to the Secondary DMZ site MC because the administrator forgot to add the Second LMS IP address to the AP Group configuration. Once the RAP can successfully connect, the administrator can add the Secondary DMZ MC as a backup LMS to fix the AP Group.

What should the administrator implement to allow the RAP to connect to the MC at the Secondary DMZ site while the outage at the primary site persists?

1. Dynamic discovery through DHCP Option 43

2. Static configuration from apboot mode

3. Dynamic discovery through DHCP Option 60

4. Dynamic discovery through multicast ADP

Answer: A

Question: 150

An administrator adds local administrative accounts to manage the Aruba Mobility Controllers (MCs). Which role should be assigned to an administrator who needs to only generate reports and monitor WLANS and ports?

1. Location-api-management

2. Network-operations

3. Root

4. AP-provisioning

Answer: B