Exam Code : HPE6-A73
Exam Name : Aruba Certified Switching Professional
Vendor Name :
"HP"
HPE6-A73 Dumps HPE6-A73 Braindumps
HPE6-A73 Real Questions HPE6-A73 Practice Test HPE6-A73 Actual Questions
killexams.com
Aruba Certified Switching Professional
https://killexams.com/pass4sure/exam-detail/HPE6-A73
Question: 34
What is correct regarding policy-based routing?
Policies can only be applied to routed interfaces.
Policies can be applied inbound and outbound.
Monitoring of policy interfaces occurs every 60 seconds.
Policy actions include routing permitting or dropping traffic.
Question: 35
What would prevent two OSPF routers from forming an adjacency? (Select two.)
Different priorities
Different area types
Different MTU sizes
Different IP addresses
Different router IDs
Question: 36
An administrator is replacing the current access switches with AOS-CX switches. The access layer switches must authenticate user and networking devices connecting to them. Some devices support no form of authentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to the same port, where the PC is connected to the data port of the phone and the phone’s LAN port is connected to the switch.
Which statement is correct about this situation?
802.1X must be configured to work in fallback mode
Device fingerprinting is required for authentication
The client-limit setting for port access needs to be changed
Device mode should be implemented
fallback mode if for the radius part; client limit is for multiple authent on one port (ie phone + pc) From doc:
aaa port-access authenticator <port-list> client-limit <1-32>
Used after executing aaa port-access authenticator <port-list> to convert authentication from port-based to user-based.
Specifies user-based 802.1X authentication and the maximum number of 802.1X-authenticated client sessions allowed on each of the ports in <port-list>. If a port currently has no authenticated client sessions, the next authenticated client session the port accepts determines the untagged VLAN membership to which the port is assigned during the session. If another client session begins later on the same port while an earlier session is active, the later session will be on the same untagged VLAN membership as the earlier session.
Question: 37
A switch will apply a device profile to a port based on which pieces of information? (Select two.)
IP header
MAC address
LLDP
User role E. 802.1Q
Question: 38
When implementing deficit weighted round robin queuing, what importance does the weight value have?
Prioritizing latency-sensitive traffic
Queue priority in processing traffic
Strict priority queue
Percentage of interface bandwidth
Question: 39
In AOS-CX switching, what determines when a frame is forwarded by the switch between the ingress and the egress port?
Egress port
Ingress port
VSX switch tables
Fabric Load Balancer
Question: 40
An administrator will be replacing a campus switching infrastructure with AOS-CX switches that support VSX capabilities. The campus involves a core, as well as multiple access layers.
Which feature should the administrator implement to allow both VSX-capable core switches to process traffic sent to the default gateway in the campus VLANs?
VRF
VRRP
IP helper
Active gateway
Active gateway = both devices route/forward traffic VRRP = Active-standbye, only active member routes/forwards traffic
Understand the Active Gateway principle In a VSX system, active gateway provides redundant default gateway functionality for the end-hosts. The default gateway of the end-host is automatically handled by both the VSX systems.