Exam Code : NS0-184
Exam Name : NetApp Certified Storage Installation Engineer, ONTAP
Vendor Name :
"Network-Appliance"
NetApp Certified Storage Installation Engineer, ONTAP
https://killexams.com/pass4sure/exam-detail/NS0-184
Question: 67
When you start a new Service Event Report, what must be entered first?
ces are the cluster interconnect LIFs created? other LIFs
2-node FAS2750 switched cluster with two new controllers. quisites should you examine in advance? (Choose two.)
he new controllers are compatible with the old controllers. as a minimum 10 GB of free space for root volumes. support the additional controllers.
new controllers can be mixed with the cluster’s existing controllers.
m/us-en/ontap-sm-classic/expansion/task_verifying_planned_configuration.html
HA pair to an existing cluster. required?
the case ID number
the project number
the node serial number
the sales order number
Question: 68
On which type of network interfa
on an FC or FCoE port
on an interface group
on a UTA port shared with
on a physical port
Question: 69
Your customer plans to expand a In this scenario, which two prere
Verify that the hard drives of t
Verify that the existing cluster h
Verify that the existing switches
Verify that the platform of the
Reference: https://docs.netapp.co
Question: 70
You want to add an AFF A400
In this scenario, which LIF type is
cluster-mgmt
intercluster
data
node-mgmt
Reference: https://docs.netapp.com/us-en/ontap-metrocluster/pdfs/sidebar/Add_a_new_controller_module_to_each_cluster.pdf
Question: 71
You want to enable secure communication with the SP or BMC through CA-signed certificates.
Which two certificate types must be installed in this scenario? (Choose two.)
cluster certificate
server certificate
root CA certificate
ONTAP certificate
d_Troubleshooting/Data_Storage_Software/ONTAP_OS/How_to_configure_communication_between_ONTAP_and_Service_Processor_(SP)_or_BMC_with_Certifica
NTAP 9.8 cluster, you have to verify if AutoSupport works. mands would you use to accomplish this task? (Choose two.)
history show
show nation show
invoke
m/us-en/ontap/pdfs/sidebar/Troubleshoot_AutoSupport.pdf
setup command and configured a 2-node ONTAP 9.8 cluster. the administrator use to validate the configuration?
AppDocs/ontap-metrocluster/blob/main/install-stretch/concept_configuring_the_mcc_software_in_ontap.adoc
isks required in a SAS shelf?
https://kb.netapp.com/Advice_an te_Authority_(CA)_signed_certificates
Question: 72
After the installation of a new O In this scenario, which two com
system node autosupport
system node autosupport check
system node autosupport desti
system node autosupport
Reference: https://docs.netapp.co
Question: 73
An administrator issued the cluster In this scenario, which tool would
Active IQ Upgrade Advisor
Interoperability Matrix Tool
NetAppDocs
Active IQ Config Advisor
Reference: https://github.com/Net
Question: 74
What is the minimum number of d
half of the shelf’s capacity
one
two
there is no minimum
Question: 75
You have completed a base installation and system registration of an AFF A250 system, but you notice that you have one failed drive. Neither “un-failing” nor reseating the drive helped to repair it. You must ensure proper replacement of the failed drive.
In this scenario, which two actions should you take? (Choose two.)
Ask the customer to open a technical case with NetApp Support.
Ask the customer for a drive with the same capacity and replace it.
Run Active IQ Config Advisor to collect all the logs on the system.
Power off the system until the drive has been replaced.
m/us-en/ontap-systems/a250/install-detailed-guide.html#step-1-prepare-for-installation
an existing cluster. As part of the upgrade process, you have updated the BES-53248 cluster switches. In this scenario. use to verify a healthy cluster after the upgrade? (Choose two.)
uster
Cluster
-protocol cdp
Cluster -fields auto-revert
firewall policy?
m/us-en/ontap/networking/configure_firewall_policies_for_lifs.html#create-a-firewall-policy-and-assigning-it-to-a-lif
in an isolated data center without outbound network access. The customer wants to troubleshoot issues locally and also create custom Excel reports for capacity utili tool would satisfy this requirement?
Reference: https://docs.netapp.co
Question: 76
You are adding new controllers to Which two commands would you
network port show -ipspace Cl
network interface show -vserver
network device-discovery show
network interface show -vserver
Question: 77
Which logical interface has a fixed
data LIF
cluster management LIF
cluster LIF
intercluster LIF
Reference: https://docs.netapp.co
Question: 78
You installed two separate clusters zation from a local server.
In this scenario, which NetApp
Active IQ Digital Advisor
Active IQ Unified Manager
Cloud Insights
ONTAP System Manager
Reference: https://www.netapp.com/media/17229-tr4015.pdf
Question: 79
A host cannot connect to the namespace configured on an NVMe-enabled SVM. In this scenario, what are two reasons for this problem? (Choose two.)
The namespace has not been added to the subsystem
The namespace has not be added to the igroup
The igroup has an incorrect NQ
E. The subsystem has an incorrect NQN
Question: 80
the exhibit, which port on an AFF A220 controller is used as port e0M in ONTAP?
ane/netapp/ontap/sysadmin/accessing/concept/c_oc_accs_access-methods-e0m.html
Click the Exhibit button.
Referring to the numbers shown in
4
3
2
1
https://documents.uow.edu.au/~bl